iSpring WGB32B 3-Stage Whole House Water Filtration System w/ 20-Inch Sediment and Carbon Block Filters

$425.00

Added to wishlistRemoved from wishlist 0
Add to compare
Category:


Price: $425.00
(as of Nov 19,2022 11:04:06 UTC – Details)


Product Description

1
1

1

1

2

2

3

3

iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

Knocks out residual bad tastes and odors. Two CTOs combine to deeply remove chlorine, and are highly effective on organic chemicals like pesticides, herbicides and industrial chemicals.

4
4

Frequently Asked Question

Q: With this whole house system, do I still need to install a water softener if my water is very hard?

A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.

This whole house water filter can remove up to 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can’t, although it does not soften your water. It is recommended that you install this WGB32B series whole house system after your water softener to achieve optimal performance if you have hard water.

To determine which product best suits your needs, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.

Note: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.

Product Features

Peak Flow Rate: 15 GPM
Minimum Working Pressure: 25 psi
Maximum Working Pressure: 80 psi
Operating Temperature: 40-100 ºF
pH Range: 6 – 11
Easy DIY Installation
1 inch NPT inlet / outlet

Highlighted Features

1

1

1

1

1

1

100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.

This whole house system removes up to 95 percent of sediment, chlorine, chloramines, chemicals, and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)

Please refer to our video and manual for installation guide. If you have any questions or difficulties during or after installation, feel free to reach out! We stand behind our products and are always here to help!

Filter Size
4.5″ x 20″
4.5″ x 20″
4.5″ x 20″
4.5″ x 20″
4.5″ x 20″
11″ x 63.5″
Filtration Capacity
Up to 100,000 Gallons
Up to 100,000 Gallons
Up to 100,000 Gallons
Up to 100,000 Gallons
Up to 150,000 Gallons
Up to 150,000 Gallons
Water Pressure Delivered
Up to 15 GPM
Up to 15 GPM
Up to 15 GPM
Up to 15 GPM
Up to 15 GPM
Up to 26 GPM
Reduces Chlorine, Taste, and Odor
Up to 99%
Up to 99%
Up to 99%
Up to 99%

Up to 99.9%
Reduces Iron and Manganese

Iron: Max 3.0 ppm down to 0.01 ppm Manganese: Max 1.0 ppm down to 0.01 ppm




Reduces Lead


150k gal at 100 ppb


99.4% reduction at 150 ppb
Prevents and Reduces Scale and Corrosion





Filtration
Sediment & Chlorine Reducing
Sediment & Chlorine Reducing
5 Micron Sediment Reducing
Chlorine Reducing
Media
PP + Carbon Block
PP + Carbon Block
Polypropylene
Coconut Shell Carbon
Recommended replacement cycle
Every 6-12 months
Every 6-12 months
Up to 100,000 Gallons (12 Months)
Up to 100,000 Gallons (12 Months)
Size
4.5” x 20”
4.5” x 20”
4.5” x 20”
4.5” x 20”

2
2

Protect Your Family and Household Appliance from Sediment, Chlorine, and More: Say goodbye to smelly, bad tasting water! Our system removes up to 99% of chlorine from water as well as up to 95% of sediment, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. This system is installed at the main water supply line in order to treat all the water in your home.
DIY Installation and Maintenance: Refer to our manual and our helpful YouTube videos for easy DIY installation. With 1” NPT inlet / outlet and 20” x 4.5” filter cartridges, the system has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance.
Top-Notch Quality: The first stage high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns. The second and third stage CTO Carbon Block filters are made of high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by an independent third-party to meet NSF/ANSI standards. The system has a capacity of 100,000 gallons of water, enough to supply a family of four with clean water for a full year.
Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems. The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use.

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “iSpring WGB32B 3-Stage Whole House Water Filtration System w/ 20-Inch Sediment and Carbon Block Filters”

Your email address will not be published. Required fields are marked *

iSpring WGB32B 3-Stage Whole House Water Filtration System w/ 20-Inch Sediment and Carbon Block Filters

$425.00

BION FREE
Logo
Reset Password
Compare items
  • Total (0)
Compare
0
Shopping cart